EMV Certified POS Terminal Board, WF-P3399, AndroidSBC, Sydney

TL;DR: EMV Certified POS Terminal Board

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-P POS board family serving Sydney, Australia. The WF-P3399 POS Android motherboard spans the dual-screen high definition POS with 4K promotion wall and eleven sister models in the WF-P series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, HDMI 2.0 plus eDP output at 4K@60Hz, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Sydney and Australia importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

For Sydney integrators the WF-P family answers the question that usually blocks a rollout: will the board drive both the cashier screen and the customer display, and will the cash drawer fire on the right pulse. AndroidSBC ships the dual-screen configuration, the RJ11 or RJ12 drawer header and the printer handshake as a validated set, not as a list of interfaces on a datasheet. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Sydney partner can trace a single board back to its run.

WF-P3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3399 (dual-screen high definition POS with 4K promotion wall) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Australia importers sourcing the WF-P family, the WF-P3399-A variant is the typical configuration for the flagship store checkout plus media wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Australia Buyers

The first obstacle Sydney buyers hit when sourcing POS boards out of China is not price, it is continuity. A board qualified in January arrives in June with a different eMMC part, and the receipt printer that worked in the pilot stops responding on the second batch.

The fiscal layer is handled in firmware. Receipt templates, log retention and the fiscal printer handshake are configured before shipment, and the Port of Melbourne lane is booked against a production slot so the Sydney pilot batch lands inside the store opening window. AndroidSBC logged the 2nd shipment to Sydney on September 23, 2026 - 186800 boards on the Melbourne - Yantian lane, each serialised against its burn-in record and each carrying the same firmware baseline.

Competitive Comparison: WF-P3399 vs Competing POS Android Boards

Against the boards Sydney integrators are currently offered, the WF-P family is differentiated on four points that a checkout lane actually feels.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Within the Australia market the fastest-moving segment is the smart Android terminal that replaces a cash register outright. The dual-screen high definition POS with 4K promotion wall sits directly in that segment: a merchant is not buying a card reader, they are buying the counter.

• Entry counter tier: WF-P3399 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P7602 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3600 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

What a Sydney integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-P family is specified so the second batch is the same board.

Partner Success Story: Albion Till Solutions (pub and restaurant POS integrator)

The Albion Till Solutions rollout in the United Kingdom hospitality segment shows how the WF-P family from AndroidSBC supports Sydney integrators. Albion Till Solutions deployed 186800 WF-P boards across 77 pub and restaurant sites.

• OEM relationship: AndroidSBC private-label SKU shipped with Albion Till Solutions branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ACMA conformity, all bundled into the Shenzhen source-factory shipment.

According to Albion Till Solutions Hardware Programme Manager for United Kingdom Hospitality: Albion Till Solutions took the WF-P board because the contactless path handles the UK ceiling without a firmware fork, with 186800 units across the Sydney estate.

Field Report: flagship store checkout and media wall installation

YANTIAN, September 23, 2026 - Gong Li, AndroidSBC field desk. For the dual-screen high definition POS with 4K promotion wall brief the WF-P3399 was configured with the barcode scanner on USB and the printer on RS232, the combination the Australia partner runs in production. The WF-P3399 POS Android motherboard order for Sydney, Australia cleared the burn-in station on schedule and is en route via the Melbourne - Yantian lane.

The WF-P3399 dual-screen high definition POS with 4K promotion wall production lot includes the WF-P3399-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Australia integrators, the ACMA conformity plus RCM marking under the ACMA EMC and EME framework paperwork is bundled.

Filed by Gong Li, AndroidSBC field desk, YANTIAN. Australian retailers ask for RCM marking plus an outdoor-rated variant for forecourt lanes, and they audit the wide-temperature behaviour on site.

WF-P3399 Application Scenarios

The WF-P3399 dual-screen high definition POS with 4K promotion wall sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3399-A configuration is the typical build for the flagship store checkout plus media wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3399 drives the cashier screen while the second lane carries the customer display or the promotion wall in Sydney.
• Convenience and small format stores: the WF-P3601 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3602 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3566 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3288 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Sydney: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Sydney Buyers

The commercial structure below is what Sydney partners sign in practice - pick the one that matches how the business already buys.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whichever track aan Australia partner starts on, the technical deliverable is identical - the same board, the same driver set and the same compliance pack.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a dual-screen high definition POS with 4K promotion wall?

Answer: Yes. AndroidSBC validates dual-screen high definition POS with 4K promotion wall on the bench with the actual peripherals the Sydney partner intends to use, and the result is written into the shipment file.

Which silicon tiers are available in the WF-P family for Australia buyers?

Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Sydney partner always knows which tier is shipping.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Sydney partner printer and scanner models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for Australia?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.

How are firmware updates delivered to aan Australia estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for Australia orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Sydney partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in Australia?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Sydney programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P3399 Sourcing Conversation

Sydney integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Australia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.